The Last Two Storm Windows Are Done!

Yesterday, after Steve was done driving his old fart party bus, we decided to finish up the very last two storm windows in the guest bedroom.

This side of the house faces South. There's no convenient porch roof, or bay window roof, to stand on like when doing the other four windows. Steve could have borrowed the neighbors tall ladder to get up high to the second story. I had a better idea.

How about we change it from the inside? I know that our beautiful old wooden windows not only lift up on the bottom pane, but the top pane will lower down so you can access the window frame by just reaching through from the inside to the outside!!!

Steve agreed, instead of dangerously balancing up on the ladder with an awkward window in his arm. This is going up 2+ stories high. Remember, it takes five steps to get up to the main floor of our house, plus we have 9' high ceilings. I would imagine it's about 20+ feet to the top of those windows.

We removed the interior lower windows and at the same time we replaced the sash cords like we did on the other windows.  The cords were quite worn and beaten, but not quite broken through. Refer to the previous blog about how we did that in case you have old windows with broken sash cords.

Steve could easily lean out and unscrew the old storm frames. Some of the screws were so old and painted over, again he had to screw them out with the tip of a pliers, or snap them off completely.

Once we got the old aluminum storm window frames off, he cleaned up the edges of the window sashing.

Now it was time to put a nice thick bead of silicone on all around the sides and top. I stuck my phone out of the window and took a photo of him from the bottom window up!

Now that we've done those first four storm windows on the other bedrooms, these went pretty well.  I guess we are "experienced" now?

Soon they were all done, and the interior windows put back in the frame, adjusted the window weights, and everything back into place.

The curtains were back up 

and things are back to normal in our guest room. 

For now.

In the winter months I pull back the curtains and line up four tables along these windows that face the South. I put plastic lids from Rubbermaid bins on top of the tables and set in pots of all of my coleus plants. I winter them over every year, as I've been doing for over 20 years. They are dug up from outside and also new shoots started to make smaller plants as well. I keep 8 to 10 pots of coleus going all winter long and bring them back out in the spring.

They are originally from my friend Connie, who shared them with me. I, in turn, have shared them with others over the years. When we go away in the winter months on vacation, I have my house sitting friend Sarah to care for them.

Here is what they look like this time of year alongside of the house...

I just love the colorful foliage,

and the blend of the fuschia and dark greens.

They are wonderful plants that don't have to wait to bloom to add color

to a flowerbed.... you get instant color in the

 Spring, Summer and Fall.

In my case, in Winter too 

because I bring them into the guest room! 

I put some into two pots flanking each side of our garage door.

They grow well in shade or sun, 

and take a LOT of water. 

These 2 pots take about a gallon each per day. 

Steve is gone this morning hauling a glass display cabinet for the museum. They bought it from a place over in Manitowoc and now it needs to get to Chilton.  Another volunteer and Steve are hoisting it and hopefully not breaking it.

Tomorrow we are helping with the museum, as hosts at the door to greet people, answer questions and lock up when we are all done.  Here is my blog post about the museum....

Calumet County Historical Museum

and their website:

http://www.calumetcountyhistoricalsociety.org/

and their facebook page:

https://www.facebook.com/CalumetHistoricalSociety

Here comes Steve in the door..... and he said they didn't crash anything and it is all in one piece!

More Storm Windows - Replacing Broken Sash Cords with Old Window Weights

My last blog dealt with changing out the two front storm windows on our 103+ year old home. We are replacing six ugly old silver aluminum storm windows with nice new white ones.

Now we moved over to the north side of the home, to change the two storm windows in my sewing room. But first-----

Sash cords! Anyone with an old house knows that the old wooden windows operate with a system of heavy weights that run up and down inside of the window casing. They are held into place with rope, called sash cord. They run over a pulley, going up and down within the window frame and help to raise and lower the heavy wooden windows. Ingenious!

Steve and I have already replaced a couple of the broken sash cords over the last 4 years, so we knew what to do. One of the windows in the sewing room had only one broken cord, but the other one had two. We had been propping it up with a wooden stick any time that we wanted it open. Well, those days are gone, it's time to fix the cords!

Here are the two broken pieces of cord 

at the top edge of the lower window, 

on each side.

The first step is to remove the lower window. To do that, you need to carefully unscrew these four screws in this wooden strip on each side of the window casing. That holds the window into place. These strips also are adjustable forward and backwards a little bit to keep the window from rattling, or from binding up too tight. By unscrewing them and shifting it a little ways in either direction, you can fine tune the windows to operate properly.

We removed the window 

and here are the two broken pieces of sash cord. 

Over years, they rot and fray, 

necessitating replacement.

While Steve had the window out he replaced some of the loose glazing on the edges. While that dried and firmed up, we were able to replace the sash cord on each side of that window's casing.

Now we need to access the window weights that fell down in the casing. If you look carefully along the side of the casing there will be a rectangular outline and a single screw. Unscrewing that allows the piece of slanted wood to come out. Now you can access to the window weight and the space that it travels up and down in.

Using real sash cord, do not use clothes line because that will stretch. I also use sash cord on my weaving looms for the ropes and pulley systems. It's much more firmly woven than regular clothes line. Measure the new piece to match up to the broken pieces.  Tie a firm double knot lump on one end, and feed the free end down over the pulley and into the window casing.  Sometimes it helps to hang a little fishing weight on a string to get down first, then tie that string to the cord and pull it from the bottom though the space.

Now tie the loose end of the cord to the weight. It's important to tie a good firm double knot on the window weights because otherwise they can fall down in the casing, or even deeper down into the wall. Then you are really screwed!

Once the weight and cord is in place, and the rectangle of slanted wood covering the access hole, the window can be put back in. Carefully put each knotted top cord into the edge of the window and run the cord up in the side groove to the top surface. Now the window can be set into place in the casing.  This works better with two people, one holding the window and one arranging the cords into place.

SEE?  All new cords and ready

to slide back into the window casing.

Carefully holding the window firmly in place, now the wooden strips can be put back on each side. The way the heads of the screws are encased with a ribbed washer spacer, you can shove the board either forward or backwards to allow it to hold the window snuggly without rattling, but not too tight that it binds up.

There, all done! 

The window weights and sash cords 

are fully operational now on this window.

Now that the window is working properly, it's time for our original project--- replacing the outside storm windows.

We are fortunate that there is a roof below this pair of windows to stand on. It is the bump out roof of the bay window from our dining room below. Steve is able to just step right out through the window and stand out there on the roof to work.

He first had to remove the ugly old aluminum storm and screen combination from the exterior surface. Many of the screws are stripped or gunked up with paint and don't come out very well. He had to use a pliers to grip the screw heads and snapped them off on many of the windows.

He was being a smart talker while doing this, so I threatened to shut and lock the windows and leave him out there!  Sometimes he gets a little big for his britches????

That would be a long jump down 

or a prickly one,

 landing in the bushes.

The weather has been extremely accommodating each time we have decided to work on the windows. Temps in the mid-seventies, light breeze, and no mosquitoes!

He did drop one tool that I had to go outside and down around into the bushes to find it. See? That's what I get for being the "Gopher"!  I think he might have done it on purpose?  Heh heh.  The previous owners who grew up here in this house suggested she come and teach Steve how to sneak in and out of those bedroom windows. She did it plenty of times when she was a teenager! LOL !!!

Remember in my last blog when I mentioned about the hail storms? Some really awful storms had passed through Chilton 17 years ago. The storm stalled right over the town for 30-40 minutes and hailed onto everything with disastrous results.

It was reported that the storm produced 120 mph (190 km/h) straight line winds. The National Weather Service reported that at least 75 mph (121 km/h) wind gusts were achieved.^[6] Residents who were in St. Nazianz as the storm hit said that it went from noon light to midnight darkness in a matter of seconds.

The storm roughly followed U.S. Route 151, with St. Nazianz and Chilton receiving the worst of the damage, caused largely by wind and hail. The hail ranged from golf ball-size to baseball-size. Many houses were destroyed by the storm, while others sustained major damage. Many cars were totaled or needed hail damage repair. The total damage caused by this storm to St. Nazianz and surrounding areas was estimated at $122 million.^[6] It was the state's first storm to exceed $100 million in damage.^[7] No casualties were caused by the storm. 

Many homes had roofs and siding and most of their windows replaced, and ours were done by the previous owners. Most of the 27 storm windows on our home were replaced. The ones we are doing now are the last 6 so they match.

This window ledge still shows you just how bad the hail hammered down. No wonder the windows broke!

Finnegan offered to help with the windows, but Binney hates the sound of the window cleaner spray can, so she booked it downstairs to keep a safe distance from that can.

Soon the storm windows were all back into place, and I was able to hang up the curtains in my sewing room. I have a collection of little stained glass suncatchers, so those were arranged all around. As I sew in this room I can look outside, but there's not a lot of visual interest other than the neighbor's house next door. By putting all the beautiful little suncatchers on the window, the light filters in with pretty dazzling colors.

Steve help me put my quilting frame and table back into place, and I was able to reorganize things back into their proper positions.

Well, that's two more windows done. We have two more windows to go in the guest room and we'll finish those up probably tonight after Steve is home from work.

~~~~~~~~

A quick side note.... sadly, our friend passed away on Tuesday.  We have known each other since school days, and Steve and I stood up in their wedding. He is leaving behind a loving wife, caring grown children and sweet grandchildren.  We sympathize with his family and we hope to make it to to the Upper Peninsula of Michigan next Tuesday for the funeral. It is hard to say Good-bye, but also we want to support the family left behind. May you rest in peace, Dave.