Our Wonderful Followers who come back again and again to read about us...

Showing posts with label roof. Show all posts
Showing posts with label roof. Show all posts

Saturday, April 10, 2010

Solar Panel Installation – Part Two

If you missed the first half, go here:   Solar Panel Installation - Part One
We had awful weather this week, 8 inches of snow, blowing, cold and miserable.  During the last week, we cut out a section of wall and installed the Trimetric Monitor gauge and the 500amp shunt used to monitor the battery condition.
PICT0010PICT0012PICT0013
The gauge is mounted in our kitchen, and the shunt is mounted under the bed close to the batteries on the negative line.  Special wires come back to the wall panel.
PICT0014PICT0002
Voila! It works!  This is like “Command Central” for seeing how many volts you have in your batteries, how many amps are being used, how much is being charged etc.
PICT0018
(that was during the week)
Now it’s Saturday morning and the snow has all melted.  Mr. Zoom Zoom (my nickname for Steve)  got all the gear together bright and early to finish the solar panel installation.  
Never mind the fact that I hadn’t had my second cup of coffee.
Never mind the fact that it was still only 34 degrees!  
Never mind the fact that at noon or 1 pm it would be in the 50’s or even 60-?

Let’s all sing together that James Taylor favorite:  Up On A Roof…………….
solar up part 238
And I gingerly crawled up the ladder to assist.    I HATE heights….ack!
solar up part 27

First step was to hook the four panels together into pairs of two.
solar up part 21solar up part 26

Now they had to be wired up together and then joined to the two 8 gauge cords
solar up part 24

 solar up part 220

solar up part 22
solar up part 221

solar up part 222 

Next comes the flip over and install the brackets to the roof… ohhh drilling holes in a roof can be VERY SCARY!    Once a hole is drilled, you can’t  UNdrill it!

solar up part 217

solar up part 223

We used some rather unique fasteners.   Before you get too excited seeing “plastic”, calm down.  It’s only temporary nylon guides that hold the metal toggle into place … read on:
solar up part 29solar up part 214
solar up part 213solar up part 225
solar up part 226solar up part 227
solar up part 228solar up part 215
solar up part 216solar up part 239 
solar up part 219solar up part 237
solar up part 236solar up part 218

Ahhhhh  now look at that !  (about four hours later)
solar up part 232

Well, not quite.   Now Steveio had to hook up the wires in the solar controller and 30 amp fuse box.  Then hook the Trimetric gauge back up to the shunt and it *should* work…..

solar up part 240solar up part 241

solar up part 242

Weeeeeheeeeeee it all works!   And even in cloudy afternoon sky in April we are pulling 20 amps.  Ain’t that something?   Now it is time for a nice long nap… so I dozed off with the doggies inside the motorhome.  Snoozing in the driveway, now cool is that?