Our Wonderful Followers who come back again and again to read about us...

Showing posts with label installation. Show all posts
Showing posts with label installation. Show all posts

Wednesday, February 1, 2012

Motorhome Modification - VORTEX FAN INSTALLATION

My Stinky Steveio insisted we need a better fan in the bathroom of the motorhome.  The little wimpy one sounds like a jet engine taking off, and he wanted to get a BIG BOY FAN instead.  

In the kitchen we already have a Fantastik Fan which works great near the stove.  But Steve had read reviews about the Vortex Fan and decided he needed one.   It installs inside the regular vent hood lid, so it's only an "inside job" and not a major roof tear off and replacement of the whole housing.

I ordered it for him for Christmas, but didn't realize the one I ordered was only the single speed, with just an ON and  OFF push button.  Shame on me!   He wanted the THREE SPEED fan version.  The price difference was $40 more, plus $14 to ship it back and $14 to get the new one shipped to us if we exchanged it.  Well, for almost $70, he decided to adapt the one we have.  Smart man!   No wonder why I married him, hey?

Ahhh here is a pic of the original push button and the new 3 speed auto heat switch he bought that is made for cars. (It's a 12 volt turn knob type switch with tiny rheostat in the switch that will allow the speed to be controlled by voltage)




He had to drill out the hole a little bigger to accommodate the new switch, and also pare away a bit of the lip edge of the control knob on the outside.  I know it says "HEAT" on it, which I later covered up  the letters with a brown fuzzy stick-on bumper pad!   LOL



Okay.. so here is the adapted fan all ready to be installed.  We waited for a warm day to go out and fire up the furnace in the rig and work on the fan swaparoo.




The first step is to remove the old fan...
Unscrew the crank handle, and then unscrew the surrounding shroud




Now the little fan needs to come off.  The instructions say to just pull on it.  Yah, right... the plastic is so old and brittle, one of the fins broke off right in Steve's hand.  The plastic fan slides off the axle of the motor unit with a good stiff tug.   Now there are two screws under the fan that hold the motor in place.  Remove those and carefully unhook the power lines.  Cap off the wires with the wire nuts so you don't accidentally touch them together.



Here is the removed fan...  the blade is broken off, but the motor is still good. FREE to anyone for the price of postage!  Email me at pfundt@gmail.com   if you want it!




Now we test-fitted the fan into place, and checked out if the gear meshed correctly into the crank mechanism.  Nope, it didn't. But, never fear, the company added an adapter for the brand of vent hood we have in our rig.  We were in business, Steveio screwed in the right pieces and we were good to go! 



My hard-working Steveio--  a man on a mission!  Now we were able to attach the right wires (checked with an amp meter to be sure they are correctly wired up)   Two screws secure the fan into the existing support brace from the old fan. At this point, we double checked all the connections and made sure that the knob will raise and lower the lid correctly too.



Yup, we got it right, so now we put the ceiling shroud back around the fan with four screws, and put the screen piece in place.  It's pretty quiet compared to the jet engine noise of the old one.  I think I like it.



And there you have it---  Steveio's Vortex Fan Installation! 




He insists this fan is not for his "bathroom habits" but more for the dogs' comfort.  If we leave the dogs inside the rig when going somewhere in the toad, we keep the windows shut but leave the top roof vents open. 

When we leave the rig, the dogs are closed into the back portion of the motorhome which consists of the bathroom and bedroom.  So the Fantastik Fan in the kitchen really doesn't do them any good back there.

The dogs lay on the cool bathroom floor or sprawl across the bed.  They have access to their water and food dishes.  We have video taped them just to be sure they are behaving themselves when we leave them alone. 

Also, we turn up the tv volume or play music on the MP3 player to drown out any outside sounds. This prevents them from hearing outside noises to bark at.  Being a good neighbor while staying in campgrounds is a must, and being subjected to the incessant barking of someone's pet locked up in a rig all day can be very upsetting.   We hate it when we are on the receiving end of a noisy dog, so never want to impose our dogs on someone else. 

Having the fan running will suck out the heat and move the air according to Steveio, and making the dogs more comfortable.  Okaaaaayy......  so he got his fan! 



(added information)

Mel, the Motorhome Guru asked a few more questions----   

I suppose I should add that info to the blog post too...
I bought it from an Ebay seller 

called oem rvparts
I paid $46.50 and $14.50 shipping for the one speed one

the 3 speed is $86 plus shipping

I am not sure of the draw on the amps, but we will see once we are in the rig for a day or so and run the different speeds and check the meter on the Trimetric readouts....


Saturday, April 10, 2010

Solar Panel Installation – Part Two

If you missed the first half, go here:   Solar Panel Installation - Part One
We had awful weather this week, 8 inches of snow, blowing, cold and miserable.  During the last week, we cut out a section of wall and installed the Trimetric Monitor gauge and the 500amp shunt used to monitor the battery condition.
PICT0010PICT0012PICT0013
The gauge is mounted in our kitchen, and the shunt is mounted under the bed close to the batteries on the negative line.  Special wires come back to the wall panel.
PICT0014PICT0002
Voila! It works!  This is like “Command Central” for seeing how many volts you have in your batteries, how many amps are being used, how much is being charged etc.
PICT0018
(that was during the week)
Now it’s Saturday morning and the snow has all melted.  Mr. Zoom Zoom (my nickname for Steve)  got all the gear together bright and early to finish the solar panel installation.  
Never mind the fact that I hadn’t had my second cup of coffee.
Never mind the fact that it was still only 34 degrees!  
Never mind the fact that at noon or 1 pm it would be in the 50’s or even 60-?

Let’s all sing together that James Taylor favorite:  Up On A Roof…………….
solar up part 238
And I gingerly crawled up the ladder to assist.    I HATE heights….ack!
solar up part 27

First step was to hook the four panels together into pairs of two.
solar up part 21solar up part 26

Now they had to be wired up together and then joined to the two 8 gauge cords
solar up part 24

 solar up part 220

solar up part 22
solar up part 221

solar up part 222 

Next comes the flip over and install the brackets to the roof… ohhh drilling holes in a roof can be VERY SCARY!    Once a hole is drilled, you can’t  UNdrill it!

solar up part 217

solar up part 223

We used some rather unique fasteners.   Before you get too excited seeing “plastic”, calm down.  It’s only temporary nylon guides that hold the metal toggle into place … read on:
solar up part 29solar up part 214
solar up part 213solar up part 225
solar up part 226solar up part 227
solar up part 228solar up part 215
solar up part 216solar up part 239 
solar up part 219solar up part 237
solar up part 236solar up part 218

Ahhhhh  now look at that !  (about four hours later)
solar up part 232

Well, not quite.   Now Steveio had to hook up the wires in the solar controller and 30 amp fuse box.  Then hook the Trimetric gauge back up to the shunt and it *should* work…..

solar up part 240solar up part 241

solar up part 242

Weeeeeheeeeeee it all works!   And even in cloudy afternoon sky in April we are pulling 20 amps.  Ain’t that something?   Now it is time for a nice long nap… so I dozed off with the doggies inside the motorhome.  Snoozing in the driveway, now cool is that?