I looked around on the internet and researched until I found the maker of the wheel, it's a Daneker wheel. Some fiber websites of spinners on a list insist that these are just decoration wheels that they do not have an orifice and are not made to spin. But some other websites said they do work. Hmmmmm It has all the features of a working wheel, including an orifice for the fibers to feed through. It's mainly constructed as a flax wheel, but can spin fine wool yarns too. I only spin fine wool, not thick stuff, so I thought I will give it a shot.
It was missing a few key pieces and needed a good cleanup....
*Craigslist photo*
A few months ago I met a man named Chuck Spann, at our local weaving guild meeting. He makes drop spindles, and refinishes spinning wheels and makes tools and supplies. He lives about 20 miles from my home, so after a phone call, he said come on over! Here is his card:
I told him I was in no hurry, as he had a few other projects to finish up, plus he works full time at a boat builder in Manitowoc. He had just finished up working on another wheel just like this for someone else. Not only was he going to make the missing parts, but he was also going to make me three larger bobbins in contrast to the one smaller one that came with the wheel.
He gave me a call on Sunday and said it was done!!!
----plus he had to come to Chilton, so he delivered it----
Here it is in all it's glory.... and just gleaming with new wax too.
(I hadn't sent the flax distaff along,
so it didn't get waxed yet--- I will do it myself)
He created three larger capacity bobbins for me....
each one perfectly balanced and true to round for no wobble
(the old one wobbled)
The flyer is able to accommodate the larger bobbins easily. Now I can spin more yarn per bobbin (less joins later in projects when knitting) He also replaced the old bent and rusty hooks with new smooth shiny ones that won't bind the fibers.
He made a new pittman arm to go on the wheel shaft from the treadle. The original was missing and he had to figure the exact height to work properly. He also added a metal "keeper" to slide over and lock the pittman arm into place on the curved shaft of the wheel. Less easier to knock loose or break this way. It "keeps" it in place when in motion.
The two little pegs that hold the wheel shaft into place were missing.... so Chuck made new pegs for that too. Two spots in the center sprocket of the wheel needed securing with tiny nails, which can be a risk to pound in, but he did a great job and made it all secure.
The leather "bearings" that hold the flyer assembly were created by gluing together layers of leather to reach a good stiff thickness that holds the flyer into the upright maidens. He added a new drive string (double drive configuration) Everything spins fine and true!
I must say, it works very, very well and spins smoothly. I have some lovely alpaca roving with a bit of glitz blended in to spin up. I bought this last fall at http://londondairyalpacas.com/ near Two Rivers and Manitowoc, WI.
The pleasant motion and use of this wheel is making it a real treat. The wheel is larger than my other one, and seems to gobble up my drafting fibers quite well and quickly. I have it set just right to not "overtwist" the single ply. It seems that I can keep up with it and treadle at a good speed. It spins "fast" and I did up this much on the bobbin in a short time.
The price charged by Chuck Spann to restore this wheel
was very reasonable,
and I am going to really enjoy spinning on it.
Here is some interesting history on the maker of this wheel.
Notice the part that he once worked with
Howard Hughes on the Spruce Goose plane project!
May 19, 2003
Charles R. Daneker, a retired executive of the Daneker Clock Co., died of heart failure Thursday at the Veterans Affairs Medical Center in Palm Beach, Fla. He was 92.
Mr. Daneker, who was known as "Brod," was born and raised in Bel Air. After graduating from Bel Air High School, he earned his bachelor's degree in 1936 from Western Maryland College, now McDaniel College.
He was commander of a Civilian Conservation Corps camp on the Eastern Shore before enlisting in the Army, where he served in the infantry. He later transferred to the Army Air Corps and trained pilots. After World War II, he was discharged with the rank of major.
Mr. Daneker later traveled to California, where he worked with Howard Hughes on his Spruce Goose project -- the famous H-4 giant seaplane that flew for about a minute on its maiden and only flight in 1947.
He returned to Bel Air and went to work for the Million-Rutherford Co., a family-owned business that was established in 1946 and at one time was the nation's largest manufacturer of grandfather clocks.
The handmade cases were fashioned by craftsmen in the company's Fallston plant, while the imported works were fabricated by German clockmakers.
The company, which was also known for mantle clocks and spinning wheels, later became the Daneker Clock Co. It closed in 1973.
Mr. Daneker, who enjoyed flying and owned several private planes, continued to fly until he was well into his 70s.
A resident of Towson, he also spent part of the year at his second home in Boynton Beach, Fla.
Plans for a memorial service were incomplete yesterday.
Mr. Daneker is survived by his wife of 66 years, the former Mary Perrine; a son, Thomas E. Daneker of Towson; a brother, Million E. Daneker of Bel Air; and several nieces and nephews.
Thank you, Mr. Daneker for making this lovely wheel!
.
What a great wheel. The take up reminds me of the Canadian Production Wheel that I had. There is something about using the antique wheels that just feels right.
ReplyDeleteNice wheel! I am a spinner from way back. I also only like to spin fine yarn. Loved silk! Glad you have "saved" this wheel!
ReplyDeleteMakes me want to learn spinning!
ReplyDeleteHi Karen,..I've read all your posts since day one, I just didn't know how to follow and post comments. I learned tody. Happy spinning
ReplyDeleteThank you for all the information on your Daneker wheel! I am in the process of restoring a Daneker also. Getting close, but no cigar just yet. ;)
ReplyDeleteSheila
Hi !!! Loved your article . “ Uncle Brod” was my great uncle ( my grandmothers brother ). I have numerous clocks , but sadly no spinning wheel . My daughter has started dying yarn and now wants to spin too , so we are looking. Congratulations on an awesome find !
ReplyDeleteHi! My name is Linda Hartling, and I was raised in Bel Air, MD. I remember the Daneker Clock Factory/Company in Fallston, MD. My mother knew the Danekers. She went to school with Mrs. Daneker. I was in High School when I remember one evening my Dad was watching the Baltimore News on TV when he said they were doing a special segment on the Daneker Clock Company. It was really interesting, and their grandfather clocks were beautiful. They also made those wonderful spinning wheels. Sadly, the factory was destroyed by a fire not long after the special.
ReplyDeleteIn 1973, I moved into my first apartment, and I bought one of the grandfather clocks, the Williamsburg, and it is still working just like it did when I purchased it brand new for $1,100. I have had it oiled and maintained since then, and it still chimes beautifully. My sister just purchased one of the spinning wheels for $200 at a home auction. The original price tag was still on it, and it was in perfect condition. The owner, who had passed away, took very good care of it. My sister was so surprised when she saw the spinning wheel, she just had to have it. I have already told my family, after she and I pass, to please keep my clock and my sister’ s spinning wheel together.
I feel so blessed to have a Daneker clock for almost 50 years now, just knowing it came from the Daneker Company just a few miles away. I still hear people say they wish they had bought one of their clocks before the fire. My clock was made from “Candlelight Cherry” wood as well as my sister’s spinning wheel. Mr. Daneker’s son once told me that you couldn’t touch my clock for $1,100 today.
Hi! My name is Linda Hartling, and I was raised in Bel Air, MD. I remember the Daneker Clock Factory/Company in Fallston, MD. My mother knew the Danekers. She went to school with Mrs. Daneker. I was in High School when I remember one evening my Dad was watching the Baltimore News on TV when he said they were doing a special segment on the Daneker Clock Company. It was really interesting, and their grandfather clocks were beautiful. They also made those wonderful spinning wheels. Sadly, the factory was destroyed by a fire not long after the special.
ReplyDeleteIn 1973, I moved into my first apartment, and I bought one of the grandfather clocks, the Williamsburg, and it is still working just like it did when I purchased it brand new for $1,100. I have had it oiled and maintained since then, and it still chimes beautifully. My sister just purchased one of the spinning wheels for $200 at a home auction. The original price tag was still on it, and it was in perfect condition. The owner, who had passed away, took very good care of it. My sister was so surprised when she saw the spinning wheel, she just had to have it. I have already told my family, after she and I pass, to please keep my clock and my sister’ s spinning wheel together.
I feel so blessed to have a Daneker clock for almost 50 years now, just knowing it came from the Daneker Company just a few miles away. I still hear people say they wish they had bought one of their clocks before the fire. My clock was made from “Candlelight Cherry” wood as well as my sister’s spinning wheel. Mr. Daneker’s son once told me that you couldn’t touch my clock for $1,100 today.
Wow that is really interesting! I didn't know that much about the company until I finally got the wheel. That is great that you lived nearby and had the foresight to invest in one of their clocks. I hope your family cherishes them long after you are gone and keeps the clock with the wheel. Thank you for all the great information
Delete